Step-by-step to the perfect waxing job

> Tips for professional floor waxing with the erGO! wax floor coating system

> Only one person needed to wax the floors

> Perfect results in four steps

> More efficient, faster, and less strain

Elastic floors such as linoleum and vinyl have many advantages: they are affordable, easy to clean, and flexible. A professional floor coating with wax provides additional protection and makes the surface even more durable. With the erGO! wax floor coating system, you can achieve perfect results in just a few steps with only one worker required.

Step 1: the right preparation

First, remove any loose dirt from the floor. In other words: weep thoroughly! Then apply the basic cleaning solution. Work in circular movements and, most importantly, keep the floor really wet. You mustn't allow the basic cleaning solution to evaporate, leaving behind a soapy film. A small pad is the best way to reach even the trickiest of corners. After ten minutes, mop the basic cleaning solution up with a wet-dry shop vacuum.

Step 2: Neutralize

Now you need to neutralize the floor's pH level, ideally to a 7. In practice, this means mopping it with lots of water, which is quick and easy with the erGO! clean floor cleaning system.

Step 3: Coating with erGO! wax

With the erGO! wax floor coating system from UNGER  you'll work more efficiently and ergonomically than ever before. Its special advantage: the coating process no longer requires two people. You can do it all by yourself, saving valuable time and labour costs.

This is helped with the backpack that can carry up to five litres of wax. This enables smooth work without interruptions. And all without having to hoist and carry heavy canisters. To use, add the wax solution after shaking well to the bag in the erGO! backpack and connect to the spray hose. It can then be worked with the WonderWaxer or the erGO! wax velcro mop. There's also no need to switch attachments mid-process.

Thanks to the ergonomic S-shaped telescopic handle, applying the wax is particularly easy on your back and joints and guarantees perfect results with minimal effort. The blockage-free pulse-jet-system also ensures precise dosing.

Step 4: Apply a second time

After about 12 hours' drying time, the surface should be coated a second time and again left to dry for another 12 hours. Now the surface is not only protected from damage, it will look really good and cleaning and maintenance will be much easier in the future.

Want to achieve faster, more efficient, and more ergonomic floor waxing? Find out more here and take advantage of the numerous benefits of erGO! wax floor coating system from UNGER.

This could be also interesting:

Add a comment

Currently popular:

Stability and safety: taking cleaning to new heights with the right water-fed pole from UNGER

> Stable, therefore safer

> Clean windows, solar panels, and façades up to 20 m (67 feet) high

> The tensile strength guarantees the pole's stability

> The right water-fed pole for each application

The Sarikohn report confirms: more efficient cleaning by means of the erGO! clean floor cleaning system

 > An independent report confirms the efficiency of the erGO! clean floor cleaning system

> 76 percent more area coverage for spot cleaning

> 34.5 minutes time saving and more working time for quality enhancing measures

> Evaluations of the report at a glance

Making the dirty clean: show us your cleaning success stories

> Demanding cleaning tasks

> What challenge have you mastered?

>Send us your before & after shots

“Buying cheap means paying twice”

> Interview with hygiene expert Sabine R. Mück

> Advantages of high-grade cleaning equipment

> Greater area coverage with less required time leads to lower cost

> Advantages of ergonomic floor cleaning systems

The most common sources of error when working with pure water

It is a fact: the use of pure water has revolutionized window cleaning and brings about significant time and cost savings – at least when used correctly.