Practical test: UNGER RubOut

> Insider tip against stubborn limescale soiling

> Remove limescale deposits, rust, soap and mineral residues

> A glass and commercial cleaner performs the user test

> This is how professional limescale removal works

> Faster and more efficient with better results

As a glass and commercial cleaner, you are constantly faced with the challenge of effectively removing stubborn soiling, such as limescale deposits, rust, soap and mineral residues. Matthias Luther from the company GSK-Services performed the user test on the showpiece Breuninger in Freiburg. His recommendation: UNGER RubOut.

The partially floor-to-ceiling windows on the fourth floor were badly affected by external environmental factors - this was the challenge faced by Matthias Luther when he received the assignment of the manual glass renovation of the Breuninger fashion boutique in Freiburg. With conventional glass cleaners, even after intensive tests, limescale deposits, rust, soap and mineral residues could not always be removed with the desired result. Luther received some advice from the UNGER sales representative for the area: UNGER RubOut.

Effective against any kind of soiling

To test the material compatibility and scratch sensitivity, Luther first applied the product in an unobtrusive spot. Since there were no impairments to be seen, he began with the cleaning process: The area to be treated was washed down with water. Then he applied RubOut on a damp cloth and worked it in circular movements on the dirty glass surface. The surface then only had to be cleaned with water and dried with a squeegee and cloth. In areas that were particularly affected, Luther repeated the process and as a professional was immediately convinced of the very good cleaning result. With the professional limescale remover from UNGER, even the most stubborn dirt was removed effortlessly.

"Compared to conventional glass cleaners, the strong performance of UNGER RubOut immediately became apparent. The work was faster and more efficient, with a better result. At the same time, the product does not have that typical pungent smell. And the most important thing: The customer was completely satisfied with the result. So I definitely recommend it", Luther summed up.

 

We want to ask you too!

Which buildings do you clean and what challenges have you had to overcome with the work? Are UNGER cleaning tools also used? Would you like to share your experiences? Leave us a comment on Facebook or write us an email to clean@clean-magazine.com.

 

This could be also interesting:

Add a comment

Currently popular:

Stability and safety: taking cleaning to new heights with the right water-fed pole from UNGER

> Stable, therefore safer

> Clean windows, solar panels, and façades up to 20 m (67 feet) high

> The tensile strength guarantees the pole's stability

> The right water-fed pole for each application

The Sarikohn report confirms: more efficient cleaning by means of the erGO! clean floor cleaning system

 > An independent report confirms the efficiency of the erGO! clean floor cleaning system

> 76 percent more area coverage for spot cleaning

> 34.5 minutes time saving and more working time for quality enhancing measures

> Evaluations of the report at a glance

Making the dirty clean: show us your cleaning success stories

> Demanding cleaning tasks

> What challenge have you mastered?

>Send us your before & after shots

“Buying cheap means paying twice”

> Interview with hygiene expert Sabine R. Mück

> Advantages of high-grade cleaning equipment

> Greater area coverage with less required time leads to lower cost

> Advantages of ergonomic floor cleaning systems

The most common sources of error when working with pure water

It is a fact: the use of pure water has revolutionized window cleaning and brings about significant time and cost savings – at least when used correctly.